My father was an appliance repair technician and it always fascinated me to see how he stripped, repaired and then reassembled microwave ovens, washing machines etc.
I think it is also better for the environment to try and repair as much as possible. Manufacturers, however, don’t like giving out the circuit diagrams as they prefer to sell you a new appliance than for you to try and repair it, but here I show that: “there are ways and means to do it”.
By way of a bit of background, my wife bought a vacuum cleaner and after a few months, it no longer worked. I watched a few YouTube videos of how people disassembled them. I then was lucky enough to have a working unit on hand for comparison purposes. The appliance in question was the Dyson V6 portable vacuum cleaner.
The comparison helps to visually see whether anything is broken and also to swap parts between the units. This allows one to follow a ‘process of elimination’ to find the defective part. In my case, I isolated the problem to the battery pack and more specifically, the charger board on the battery pack. I found that it doesn’t charge the batteries and two batteries had actually had their internal protective elements operate.
I matched the two failed batteries, re-soldered the battery interconnections and then when that was done plugged the charger in. The red LED flashes for a few seconds and then goes off. This told me that the charger had an issue. I bought a new pack on-line fitted it and it is been working flawlessly ever since!
I will strip the battery pack for the good batteries and use them on other IoT projects.
A couple of lessons here:
1) If you can find a working comparison unit, it accelerates the fault-finding process.
2) YouTube is very useful for giving disassembly instructions and also describes some of the more common issues with that particular model. The ‘pulsating drive issue’ is commonly encountered when the filters are blocked on my unit, as an example.
3) If the red charger light flashes for a few seconds (visible from two plastic holes in the battery pack) and then no longer flashes the problem is with the charger and battery management system (BMS) which would be a challenge to repair. eBay the size in milli-amps and it will save you time and effort to replace it. I wouldn’t recommend opening it as it quite a challenge.